Mitutoyo HR-530 Series - Mounting the Indenter; Test Time Settings; Correction Value Settings; GO;NG Judgment Settings

No. 99MBG518A
D-23
PART D : 3 Method to Set a Group and Test Multiple Points
3.3
Mounting the Indenter
Mount the [Ball 1/2] indenter onto the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
3.4
Test Time Settings
Set the test time.
For details about setting methods, see
"2.4 Test Time Settings" (page D-8).
3.5
Correction Value Settings
Set a correction value as necessary.
Set it in advance when an error occurs in test results between testing machines or operators, etc.
For details about correction values, see
"2.3 Correction" (page G-23) in "PART G Settings".
3.6
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".