No. 99MBG518A
D-8
PART D : 2 Method to Test One Point
2.3
Mounting the Indenter
Mount the [Ball 1/2] indenter onto the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
2.4
Test Time Settings
Set the test time.
1
Touch the [Test] tab of the "condition setup" tab block.
» The Test settings screen is displayed.
2
Touch [Force/Time] on the "basic operation" block.
» The Test Time settings screen is dis-
played.
3
Set the conditions.
For details about various conditions, see
"2.2 Test Force/Time" (page G-18) in
"PART G Settings".
To Next Page
Loading...
