Mitutoyo HR-530 Series - Mounting the Indenter; Correction Value Settings; GO;NG Judgment Settings

No. 99MBG518A
F-18
PART F : 3 Method to Set a Group and Test Multiple Points
3.4
Mounting the Indenter
Mount the indenter set in "3.3 Indenter Settings" to the main unit of the testing machine.
For details about mounting the indenter, see
"3 Inspection and Replacement of Consumable Parts"
(page H-5) in "PART H Inspection and Maintenance".
3.5
Test Force/Time Settings
Set the test force and the test time.
For details about setting methods, see
"2.5 Test Force/Time Settings" (page F-9).
3.6
Correction Value Settings
Set a correction value as necessary.
Set it in advance when an error occurs in test results between testing machines or operators, etc.
For details about correction values, see
"2.3 Correction" (page G-23) in "PART G Settings".
3.7
GO/NG Judgment Settings
Set the GO/NG judgment for test results as necessary.
When you set the GO/NG judgment, GO/NG is displayed in the test results.
For details about GO/NG judgment, see
"3.2.1 GO/NG Judgment" (page G-28) in "PART G Settings".