Mitutoyo HR-530 Series - Detailed Test Results

No. 99MBG518A
G-46
PART G : 4 Results
4.2.5 Details
Touchtheresultswhosedetailsyouwanttoconrmonthelistdisplayscreenofthe[Result]tab,and
then touch the [Detail] button to display the screen that displays the individual data.
The structure of the screen varies depending on whether the group setting is enabled or disabled.
■When the group settings are disabled
①
②
④
⑧
⑪
③
⑥
⑦
⑨
⑩
⑤
⑫ ⑬
No. Name Details
①
Change data
buttons
Touch this button to switch the display to show the data for the previous/
next test results.
②
Sample No. Displays the current number of tested measuring points/total number of
measuring points.
Touch this button to change the number of the test results to display.
③
Conversion Displays the conversion results and conversion scale for the test results
if the conversion setting is set to a value other than OFF.
The conversion value is displayed on the left and the conversion scale
on the right.
④
GO/NG judgment Displays GO/+NG/-NG for the test results if judgment is enabled.
GO: Passed
+NG: Upper limit failed
-NG: Lower limit failed
⑤
Hardness value Displays the hardness value.
⑥
Scale Displays the hardness scale during a test.
⑦
Test force Displays the total test force during the test.
⑧
Correction icon Displays an icon if user correction or curve correction is enabled.
⑨
X-axis coordinate
(position)
Indicates the position of the X-axis during a test.
[-----]isdisplayedifthene-adjustmenttableforJominytestingoption-
al accessory is not connected.
⑩
Y-axis coordinate
(position)
The HR-530 does not support a Y-axis.
It is a dummy display.
⑪
List display button Returns to the list display screen.
⑫
Delete button Deletes the data that is displayed.