Mitutoyo HR-530 Series - Method to Set a Group and Test Multiple Points

No. 99MBG518A
F-3
PART F : 1 Test Flow
1.2
Method to Set a Group and Test Multiple Points
Thissectionexplainstheoperationowtosetagroupandtestmultiplepoints.
Preparation
Test method settings
"3.1 Test Method Settings" (page
F-17)
Display conditions settings
"3.2 Display Conditions Settings"
(page F-17)
Indenter settings
"3.3 Indenter Settings" (page F-17)
Indenter mounting
"3.4 Mounting the Indenter" (page
F-18)
Test force/time settings
"3.5 Test Force/Time Settings"
(page F-18)
■When setting a correction value
Correction value settings
"3.6 Correction Value Settings"
(page F-18)
■When setting a GO/NG judgment
GO/NG judgment settings
"3.7 GO/NG Judgment Settings"
(page F-18)
Group settings
"3.8 Group Settings" (page F-19)