Mitutoyo HR-530 Series - Method to Set a Group and Test Multiple Points

No. 99MBG518A
C-2
PART C : 1 Test Flow
1.2
Method to Set a Group and Test Multiple Points
Thissectionexplainstheoperationowtosetagroupandtestmultiplepoints.
Preparation
Test method settings
"3.1 Test Method Settings" (page
C-15)
Display conditions settings
"3.2 Display Conditions Settings"
(page C-16)
Scale settings
"3.3 Scale Settings" (page C-17)
Indenter mounting
"3.4 Mounting the Indenter" (page
C-17)
Test time settings
"3.5 Test Time Settings" (page
C-17)
■When setting a correction value
Correction value settings
"3.6 Correction Value Settings"
(page C-17)
■When setting a GO/NG judgment
GO/NG judgment settings
"3.7 GO/NG Judgment Settings"
(page C-17)
Group settings
"3.8 Group Settings" (page C-18)
Test
Specimen set
"3.9 Setting the Specimen" (page
C-20)
Test execution
"3.10 Executing the Test" (page
C-21)
"5 Executing Continuous Tests"
(page C-37)
Conrmationoftestresults
"3.10.2ConrmingtheTestResults
(First Point)" (page C-22)
"3.10.4ConrmingtheTestResults
(Second Point)" (page C-25)