Mitutoyo HR-530 Series - Method to Set a Group and Test Multiple Points; Test Method Settings; Display Conditions Settings; Mounting the Indenter

No. 99MBG518A
D-3
PART D : 1 Test Flow
1.2
Method to Set a Group and Test Multiple Points
Thissectionexplainstheoperationowtosetagroupandtestmultiplepoints.
Preparation
Test method settings
"3.1 Test Method Settings" (page
D-21)
Display conditions settings
"3.2 Display Conditions Settings"
(page D-22)
Indenter mounting
"3.3 Mounting the Indenter" (page
D-23)
Test time settings
"3.4 Test Time Settings" (page
D-23)
■When setting a correction value
Correction value settings
"3.5 Correction Value Settings"
(page D-23)
■When setting a GO/NG judgment
GO/NG judgment settings
"3.6 GO/NG Judgment Settings"
(page D-23)
Group settings
"3.7 Group Settings" (page D-24)
Test for the specimen for obtaining
the correction value
"3.8 Test for the Specimen for Ob-
taining the Correction Value" (page
D-26)
Correction value setup
"3.9 Correction Value Setup" (page
D-28)