No. 99MBG518A
G-15
PART G : 2 Test Conditions
2.1.3 Plastic Hardness Test (ISO 2039-2)
No. Name Details
①
Scale button Displays the scale that is selected on the button.
Touch the scale button to display the scale selection screen and
change the scale directly.
Touch the scale button to use, and then touch the [OK] button.
The test method, indenter, preliminary test force, and the total test
force related to the scale are displayed at the bottom of the scale
selection screen.
②
Indenter selection Selects the diameter [mm] and material of the ball for the indenter.
Ball material W: Carbide ball; S: Steel ball
③
Test force selection Selects the total test force. The test force switches to the test force
of the button that is touched.
To Next Page
Loading...
