Mitutoyo HR-530 Series - Testing from the Third Point Onwards

No. 99MBG518A
F-27
PART F : 3 Method to Set a Group and Test Multiple Points
3
Input the indent measurement value (d2).
1 Input the indent measurement value.
2 Touch the [Enter] button.
» The test result is displayed.
3.10.8 ConrmingtheTestResults(SecondPoint)
Conrmthetestresultsonthescreenorwithexternaloutput.
Detailedinformationaboutthetestresults(statisticaldisplay,graphdisplay,etc.)canbeconrmedon
the test results display screen.
For details, see
"4 Results" (page G-35) in "PART G Settings".
For details about external output, see
"3.3 External Output" (page G-30) in "PART G Settings".
3.10.9 Testing from the Third Point Onwards
Execute subsequent tests from the third point by repeating "3.10.5 Executing the Test (Second Point)" to
"3.10.8ConrmingtheTestResults(SecondPoint)"asdoneforthesecondpoint.