Mitutoyo HR-530 Series - Connecting Printer DP-1 VA LOGGER

No. 99MBG518A
K-1
PART K : 1 Connecting with Printer DP-1VA LOGGER
1
Connecting with Printer DP-1VA
LOGGER
NOTICE
• Turn on the power to printer DP-1VA LOGGER after connecting the printer to the main unit of the testing
machine and turning on the main unit of the testing machine.
• IfthedigitssetwiththedisplayunitandthedigitssetwithprinterDP-1VALOGGERdi󰀨er,anoutputerror
occurs.
For the procedure for setting the digits with the display unit, see
"5.3 Display" (page G-51) in "PART G
Settings".
Tips
When using Mitutoyo printer DP-1VA LOGGER, do not use the measurement data timer input function of printer
DP-1VA LOGGER. The HR-530 series does not support this function.
1
Connect printer DP-1VA LOGGER to an AC adapter or insert four AA nickel metal hydride bat-
teries or alkaline batteries.
2
Load the printer paper in printer DP-1VA LOGGER.
3
Connect the printer DP-1VA LOGGER cable to the Digimatic data output port of the main unit of
the testing machine.
For the location of the port, see "2.2 Connector Part of the Main Unit of the Testing Machine" (page
A-4) in "PART A Overview".