Mitutoyo HR-530 Series - Page 110

No. 99MBG518A
C-38
PART C : 5 Executing Continuous Tests
3
Slowly turn the up/down handle clockwise until the automatic brake engages and the up/down
handleisxed.
Tips
Whentheup/downhandleentersthexedposition,removeyourhandfromtheup/downhandle.
» Thersttestisexecuted.
4
Execute the next test.
Tips
Do not move the specimen stage during continuous testing. Tests cannot be performed continuously if the spec-
imen stage is moved.
1 Move the specimen to the next test
position.