No. 99MBG518A
C-39
PART C : 5 Executing Continuous Tests
2 Touch the [Run] button on the home
screen or press the start key on the front
switch panel.
» The test is executed.
3 Repeat steps 1 and 2 until the continu-
oustestingisnished.
5
Finish continuous testing.
1 Touch the [Continuous] button.
» Theconrmationdialogboxis
displayed.
2 Turn the up/down handle counterclock-
wise to lower the specimen stage.
3 Touch the [OK] button.
» The [Continuous] button is
displayed in gray. (Continuous
testing is disabled.)
To Next Page
Loading...
