Mitutoyo HR-530 Series - Page 256

No. 99MBG518A
G-32
PART G : 3 Execution Conditions
Output method Output contents
Group
settings
External output settings
USB Serial USB memory SPC
Manual
Auto-
matic
Manual
Auto-
matic
Manual
Auto-
matic
Manual
Auto-
matic
Output
from Result
> Detail
(during
test result
selection)
Touch
the print
button.
The data is for one test.
The number is consecutive
for all tests if the home
screen is the standard,
simple, or multi-test
screen.
The number is consecutive
in a group if the home
screen is the list average
or list screen.
ON
     
Only the
hardness
value
Only the
hardness
value
Output form
Results >
List
The data is for all tests.
The number is consecutive
for all tests.
OFF
     
— —
Insu󰀩cientgroup:The
data for all tests is output
by group.
Su󰀩cientgroup:Thedata
for all tests is output by
group with range, average,
and division.
The number is consecutive
for all tests.
A blank line is output at the
beginning and end.
The number is consecutive
for all tests if the home
screen is the standard,
simple, or multi-test
screen.
The number is consecutive
in a group if the home
screen is the list average
or list screen.
ON
     
— —
Output from
Result >
Statistical
The statistical data of the
screen is output. For group
measurements, the num-
ber represents the number
of groups.
—
   
— — — —
Output from
Result >
Detail
Touch
the
average
value.
The test data of the screen
is output.
The number is consecutive
in the group.
Aninsu󰀩cientgroupisnot
output.
ON
   

Test
data

Test
data
— —