Mitutoyo HR-530 Series - Page 146

No. 99MBG518A
D-32
PART D : 3 Method to Set a Group and Test Multiple Points
3.11.3 Executing the Test (Second Point)
Execute the second test.
CAUTION
Whenoperatingthespecimenstage,donotputyourhandsorngersundertheindenter.Theymaybecome
pinched.
Tips
Tests cannot be executed unless the home screen is displayed.
1
Turn the up/down handle clockwise to raise the specimen stage until the distance between the
indenter and the specimen is about 2 through 3 mm.
2
Move the specimen to the test position.