xiii
No. 99MBG518A
■How to read this document
No. 99MBG518A
C-12
PART C : 2 Method to Test One Point
2.9
Executing the Test
Execute the test.
When operating the specimen stage, do not put your hands or under the indenter. They may become
pinched.
1
Touch the home tab of the "condition setup" tab block.
» The home screen is displayed.
Tips
Tests cannot be executed unless the home
screen is displayed.
2
Slowly turn the up/down handle clockwise until the automatic brake engages and the up/down
handle is
Tips
When the up/down handle enters the position, remove your hand from the up/down handle.
» The test is executed.
Indicates the action resulted from
some operation(s).
Indicates supplementary information.
Indicates safety information.
Indicates an operating procedure to
be performed or its outline.
Indicates the part code of a currently
opened page.
■Representation of brackets or marks
The meanings of brackets or marks to be used in this document are as follows.
( ): Round brackets Represent a paraphrase of an immediately preceding phrase or a
supplementary explanation.
" ": Double quotation marks Represent a highlighted phrase. They also indicate an index where
information to be referenced is described.
[ ]: Square brackets Represent buttons, displayed items, and tab names on the screen.
They also indicate an item to be purposely entered or selected by
the customer.
To Next Page
Loading...
