Mitutoyo HR-530 Series - Page 175

No. 99MBG518A
E-23
PART E : 3 Method to Set a Group and Test Multiple Points
3
Method to Set a Group and Test
Multiple Points
This chapter explains an example of the case of executing an indent depth Brinell hardness
test on multiple points set as a group. By setting a group, the average value of multiple test
results can be output as one data value. When calculating the average value, it is possible to
excludethemaximumandminimumvalues.Intheactualtest,setthetestforcespeciedin
the technical drawing, etc.
Setting item Setting value (example)
Test Method HBT
Display [List Ave.] (or [List])
Scale HBT
Number group 5
3.1
Test Method Settings
Set the test method.
For details about setting methods, see
"2.1 Test Method Settings" (page E-6).