Mitutoyo HR-530 Series - Page 233

No. 99MBG518A
G-9
PART G : 1 Home Screen
«Toggling screens»
Touch the [Display] button on the [System] tab, and then touch the [List Ave.] button on the screen that
is displayed to switch between the list average and list screens.
[List Ave.] button [List] button
Icon Name Description
Admin. mode
Displayed when [Admin. mode] is [ON].
For details, see "5.4 Equipment" (page G-53).
Rounding
Displayed when [Rounding] is enabled for the smallest digit.
For details, see "5.3 Display" (page G-51).
External output: USB
Displayed when [USB] in the external output settings is set to
[Automatic].
For details, see "3.3 External Output" (page G-30).
External output: Serial
Displayed when [Serial] in the external output settings is set to
[Automatic].
For details, see "3.3 External Output" (page G-30).
External output: SPC
Displayed when [SPC] in the external output settings is set to
[Automatic].
For details, see "3.3 External Output" (page G-30).
External output: USB
memory
Displayed when [USB memory] in the external output settings
is set to [Automatic].
For details, see "3.3 External Output" (page G-30).
Curve correction:
Cylinder
Displayed when [Cylind] is enabled for [Curve C.].
For details, see "2.3 Correction" (page G-23).
Curve correction:
Sphere
Displayed when [Sphere] is enabled for [Curve C.].
For details, see "2.3 Correction" (page G-23).
User correction:
Multi-point correction
Displayed when [Multi.] is enabled for [User C.].
For details, see "2.3 Correction" (page G-23).
User correction: Shift
Displayed when [Shift] is enabled for [User C.].
For details, see "2.3 Correction" (page G-23).