Mitutoyo HR-530 Series - Page 70

No. 99MBG518A
B-24
PART B : 7 Installing the Display Unit
4 Tighten the knurled screws (x4).
①
①
No. Name
①
Knurled screws
2
Install the display unit on the top of the main unit of the testing machine.
1 Align the notches of the display unit
xingplatewiththesecuringscrews(x2)
of the main unit of the testing machine.
②
①
No. Name
①
Securing screws
②
Notches
2 Tighten the knurled screw (x1).
①
No. Name
①
Knurled screws