MI-42-0001 Rev. 19 127
SCANNING: View an Existing Scan
NOTE: Through the DICOM Viewer, users can export a complete collection of patient scan data
f, a selected study g, and a selected series, or single Scout scan h.
After viewing the scan (see Figure 98):
3. Select a study
s.
To help identify the correct study, the screen provides:
• Study ID generated by AIRO
• Date and time of last series or scan in study
• Count of series or scans contained in the study
• Study description
4. Select a series
d (a scan identified by date/time, type, region, images, and description).
5. Touch Next to view selected scan.
Options Action
Export scan to network or USB.
1. Select Export.
2. Select options and then touch either
Send to DICOM
node
or
Export to USB
. See section 6.8.24 Sending
Scan to DICOM or USB.
View other scans for this patient or
create a new scan for this patient.
1. Touch Next.
2. DICOM Viewer shows selected scan.
3. Touch
Next
.
4. On the dialog, touch
OK
to return to the Welcome
screen. See section 6.8.1 New Scan.
Steps
To Next Page
Loading...