Network Setup
This chapter describes the Network Setup menu information used to configure the switch. This chapter
consists of the following switch Network configuration activities:
• Displaying the Network Interface
• Viewing Network IP Information
• Viewing and Configuring Layer 2 Virtual LANs
• Configuring Switch Virtual Interfaces
• Viewing and Configuring Switch WLANs
• Viewing Associated MU Details
• Viewing Access Port Information
• Viewing Access Port Adoption Defaults
• Viewing Adopted Access Ports
• Configuring Access Ports
• Multiple Spanning Tree
• IGMP Snooping
• Wired Hotspot
NOTE: HTTPS must be enabled to access the switch applet. Ensure HTTPS access has
been enabled before using the login screen to access the switch applet.
To Next Page
Loading...
