About This Guide
Introduction
This guide provides information about using the following Motorola switches and version numbers:
• RFS4000 4.3
• RFS6000 4.3
• RFS7000 4.3
Documentation Set
The documentation set for the Motorola RF Series Switches is partitioned into the following guides to
provide information for specific user needs.
• Installation Guides - Each switch has a unique Installation Guide which describes the basic hardware
setup and configuration required to transition to more advanced configuration of the switches.
• Motorola RFS Series Wireless LAN Switches WiNG System Reference - Describes configuration
of the Motorola RF Switches using the Web UI.
• Motorola RFS Series Wireless LAN Switches WiNG CLI Reference - Describes the Command Line
Interface (CLI) and Management Information Base (MIB) commands used to configure the Motorola RF
Switches.
• RF Management Software Users Guide - Describes how to use Motorola RFMS to set up and monitor
your switch in respect to areas of good RF throughput and defined physical barriers.
Document Conventions
The following conventions are used in this document to draw your attention to important information:
NOTE: Screens and windows pictured in this guide are samples and can differ from actual
screens.
NOTE: Indicate tips or special requirements.
SWITCH NOTE: Indicates caveats unique to a RFS4000, RFS6000 or RFS7000 model
switch.
To Next Page
Loading...
Need help?
General
