Switch Services 5-57
the Recently Found Devices tab to view a table of devices discovered by the current discovery process.
Each discovered device compatible with the locating switch is displayed in a shaded color to distinguish it
from non-compatible devices.
5.7.1 Configuring Discovery Profiles
To configure switch discovery:
1. Select Services > Discovery from the main menu tree.
The Discovery page launches with the Discovery Profiles tab displayed
2. Refer to the following information within the Discovery Profiles tab to discern whether an existing profile
can be used as is, requires modification (or deletion) or if a new discovery profile is required.
CAUTION: Switch discovery can be a time consuming operation. However, the switch
discovery operation is a standalone process. This allows users to perform other
configuration operations when discovery is running in the background.
Index Displays the numerical identifier used to differentiate this profile from others with
similar configurations. The index is supplied to new profiles sequentially.
Profile Name Displays the user-assigned name for the profile. The profile name should
associate the profile with the group of devices or area where the discovered
devices are anticipated to be located.
Start IP Address Displays the starting numeric (non DNS) IP address from where the search for
available network devices is conducted.
End IP Address Displays the ending numeric (non DNS) IP address from where the search for
available network devices is conducted.
SNMP Version Displays the version of the SNMP (either SNMP v2 or v3) used for discovering
available network devices.
To Next Page
Loading...
Need help?
General
