Network Setup 4-117
2. Click the VCAC Statistics tab.
3. The following statistics are displayed:
4.7.8 Viewing Mesh Statistics
To view Mesh Statistics:
1. Select Network > Access Port Radios from the main menu tree.
Index Displays the numerical identifier assigned to each Access Port.
Description Displays the names assigned to each of the APs. The AP name can be configured
on the Access Port Radios Configuration page.
Total Voice Calls Displays the total number of voice calls attempted for each Access Port.
Roamed Calls Displays the total number of voice calls that were roamed from each Access Port.
Rejected Calls Displays the total number of voice calls rejected by each Access Port. Calls may
be rejected if the call does not meet the TPSEC Admission Control requirements
for the AP or when an AP would not be able to provide the necessary QoS for the
call.
Used Air Time(%) Displays the total percentage of air time that each Access Port has dedicated to
voice calls.
Total Air Time(%) Displays the total percentage of air time allocated for TPSEC clients.
To Next Page
Loading...
