Motorola RFS Series System Reference Guide

7-2 Motorola RF Switch System Reference Guide
To display the main Management screen:
1. Select Management Access from the main menu tree.
2. Refer to the Current Status field to review the following read-only information:
7.2 Configuring Access Control
Refer to the Access Control screen to allow/deny management access to the switch using the different
protocols (HTTP, HTTPS, Telnet, SSH or SNMP) available to users. Access options are either enabled or
disabled as required. The Access Control screen is not meant to function as an ACL (in routers or other
firewalls), where you can specify and customize specific IPs to access specific interfaces.
To configure access control settings:
Firmware In Use The Firmware In Use value displays the software version currently running on the
switch. Use this information to assess whether a firmware update would improve
the switch feature set and functionality.
Log Output The Log Output value displays the target location for log files output by the switch.
NOTE: The Apply and Revert functions are greyed out within the Management Access
screen, as this screen is has no configurable parameters for the user to update and save.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English