Motorola RFS Series System Reference Guide

4-6 Motorola RF Switch System Reference Guide
6. Click Cancel to close the dialog without committing updates to the running configuration.
4.2.2 Configuring IP Forwarding
The IP Forwarding table lists all the routing entries to route the packets to a specific destination. To view the
IP forwarding configuration:
1. Select Network > Internet Protocol from the main tree menu.
2. Select the IP Forwarding tab.
Use the Filtering Option to view the details displayed in the table.
3. The read-only IP Forwarding tab displays the current status between VLANs. To toggle the status of
routing between VLANs, use the Enable/Disable options located at the bottom of the screen.
The following details are displayed in the table:
Destination Subnet Displays the mask used for destination subnet entries. The Subnet Mask is the IP
mask used to divide internet addresses into blocks (known as subnets). A value of
255.255.255.0 will support 256 IP addresses.
Subnet Mask Displays the mask used for destination subnet entries. The Subnet Mask is the IP
mask used to divide internet addresses into blocks (known as subnets). A value of
255.255.255.0 will support 256 IP addresses.
Gateway Address Displays the IP address of the Gateway used to route the packets to the specified
destination subnet. Do not set the gateway address to any VLAN interface used
by the switch.
Interface Displays the interface name with which the destination subnet entries are
attached.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English