Motorola RFS Series System Reference Guide

6-12 Motorola RF Switch System Reference Guide
5. When using the Frames with known bad ESSIDs violation parameter it is necessary to enter a list of
known bad ESSIDs for the violation parameter. To enter this information, select Frames with known
bad ESSIDs and then click the Bad Essid Config button to launch a dialogue box where bad ESSIDs
can be added and removed.
6. Click on Apply button to save the configuration.
7. Click on Revert to rollback to the previous configuration.
6.3.2 Viewing Filtered MUs
Periodically check the Filtered MUs tab to review MUs filtered by the switch for incurring a violation based
on the settings defined within the Configuration tab. Each MU listed can be deleted from the list or its
attributes exported to a user defined location.
To view status of those MUs filtered using the settings defined within the Configuration tab:
1. Select Security > Wireless IDS/ IPS from the main tree menu.
CAUTION: Setting MU threshold values too low can jeopardize MU performance or break
the MU’s connection.
NOTE: Setting a violation parameter to 0 will disable that option.
NOTE: If using the Frames with known bad ESSIDs violation parameter if no ESSIDs
are entered in the Bad Essid Config dialogue, this parameter will not function.
!

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English