Switch Management 7-11
7.4.1 Enabling Trap Configuration
If unsure whether to enable a specific trap, select it and view a brief description that may help your decision.
Use Expand all items to explode each trap category and view all the traps that can be enabled. Traps can
either be enabled by group or as individual traps within each parent category.
To configure SNMP trap definitions:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
2. Select the Allow Traps to be generated checkbox to enable the selection (and employment) of all the
traps within the screen. Leaving the checkbox unselected means traps must be enabled by category or
individually.
3. Refer to trap categories within the Configuration screen to determine whether traps should be enabled
by group or individually enabled within parent groups.
4. Select an individual trap, by expanding the node in the tree view, to view a high-level description of this
specific trap within the Trap Description field. You can also select a trap family category heading (such
as "Redundancy" or "NSM") to view a high-level description of the traps within that trap category.
Redundancy Displays a list of sub-items (trap options) specific to the Redundancy (clustering)
configuration option. Select an individual trap within this subsection and click the
Enable button to enable this specific trap or highlight the trap family parent item
and click Enable all sub-items to enable all traps within the Cluster category.
Miscellaneous Displays a list of sub-items (trap options) specific to the Miscellaneous
configuration option (traps that do not fit in any other existing category). Select an
individual trap within this subsection and click the Enable button to enable this
specific trap or highlight the Miscellaneous trap family parent item and click
Enable all sub-items to enable all traps within the Miscellaneous category.
NSM Displays a list of sub-items (trap options) specific to the NSM configuration option.
Select an individual trap within this subsection and click the Enable button to
enable this specific trap or highlight the NSM trap family parent item and click
Enable all sub-items to enable all traps within the NSM category.
To Next Page
Loading...
Need help?
General
