Motorola RFS Series - Viewing Switch Configurations

Switch Information 3-25
4. To reset the WAN Interface card configuration, click the Reset button and the configuration fields will
be cleared.
3.3 Viewing Switch Configurations
Use the Configurations screen to review the configuration files available to the switch. The details of each
configuration can be viewed individually. Optionally, edit the file to modify its name or use the file as the
switch startup configuration. A file can be deleted from the list of available configurations or transferred to
a user specified location.
To view the Configuration files available to the switch:
1. Select Switch > Configurations from the main menu tree.
The following information is displayed in tabular format. Configuration files (with the exception of
startup-config and running-config) can be edited, viewed in detail, or deleted.
NOTE: To use a 3G Wireless WAN card with the switch, it must first be initialized on a
laptop. For activation and initialization information, refer to the instructions included with
the WAN card. If your Wireless WAN Interface card service provider makes use of a PIN
number for access to the network, disable the PIN number before using the card with the
switch.
NOTE: To view the entire switch configuration using SNMP, the switch CLI provides a
better medium to review the entire switch configuration.
NOTE: The Motorola RF Management Software is a recommended utility to plan the
deployment of the switch and view its configuration once operational in the field.
Motorola RFMS can help optimize the positioning and configuration of a switch (and its
associated radios) in respect to a WLAN’s MU throughput requirements and can help
detect rogue devices. For more information, refer to the Motorola Web site.