EasyManuals Logo

Motorola RFS Series System Reference Guide

Motorola RFS Series
590 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #326 background imageLoading...
Page #326 background image
5-44 Motorola RF Switch System Reference
5. Refer to the Status field.
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
6. Click Close to close the dialog without committing updates to the running configuration.
5.4.3.2 Adding a Redundancy Group Member
Use the Add screen as the means to add a new member (by adding their IP address) to an existing
redundancy group (cluster).
To add a new member to a redundancy group:
1. Select Services > Redundancy from the main menu tree.
The Redundancy screen displays with the Configuration tab selected.
2. Select the Member tab.
3. Select the Add button.
4. Enter the IP Address of a new member.
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Refer to the Status field.
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
7. Click Cancel to close the dialog without committing updates to the running configuration.
5.4.4 Redundancy Group License Aggregation Rules
The following are rules governing license usage amongst members of a redundancy group:
A redundancy group license is determined by adding individual switch licenses.
Do not allow different port speed/duplex settings on members. Each members should have the settings.
Rogue APs Displays the number of Rogue APs detected by each member. Use this information
to discern whether these radios represent legitimate threats to other members of
the redundancy group.
Self Healing Radios Displays the number of self healing radios on each detected member. These radios
can be invaluable if other radios within the redundancy group were to experience
problems requiring healing by another radio.

Table of Contents

Other manuals for Motorola RFS Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola RFS Series and is the answer not in the manual?

Motorola RFS Series Specifications

General IconGeneral
BrandMotorola
ModelRFS Series
CategorySwitch
LanguageEnglish

Related product manuals