Motorola RFS Series System Reference Guide

Switch Management 7-5
7.3.1 Configuring SNMP v1/v2 Access
SNMP version 2 (SNMPv2) is an evolution of SNMPv1. The Get, GetNext, and Set operations used in
SNMPv1 are exactly the same as those used in SNMPv2. However, SNMPv2 adds and enhances some
protocol operations. The SNMPv2 Trap operation, for example, serves the same function used in SNMPv1,
but uses a different message format and is designed to replace a SNMPv1 Trap.
Refer to the v1/v2c screen for information on existing SNMP v1/v2 community names and their current
access control settings. Community names can be modified by selecting a community name and clicking the
Edit button.
To review existing SNMP v1/v2 definitions:
1. Select Management Access > SNMP Access > v1/v2 from the main menu tree.
NOTE: The SNMP facility cannot retrieve a configuration file directly from its SNMP
interface. First deposit the configuration file to a computer, then FTP the file to the switch.
NOTE: When accessing the switch via a SNMP client ensure that UDP traffic is allowed
on port 161 for the network being used for the switch and the SNMP client.
NOTE: The SNMP undo feature is not supported.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English