Motorola RFS Series System Reference Guide

4-152 Motorola RF Switch System Reference Guide
6. To enable Secure Mode, click the Enable Secure Mode button to enable secure-mode to a set of APs.
The AP’s MAC Address and mode will be saved in the running configuration. If secure-mode is set to
enable, it means that WISP-e transactions for this AP will be secured.
7. To disable Secure Mode, click the Disable Secure Mode button to disable secure-mode to a set of APs.
The AP’s MAC Address and mode will be saved in the running configuration. If secure-mode is set to
disable, it means that WISP-e transactions for this AP will not be secured.
8. When using clustering and the Cluster GUI feature is enabled, a pull-down menu will be available to
select which cluster members’ APs are displayed. To view APs from all cluster members, select All from
the pull-down menu. To view APs radios from a specific cluster member, select that member’s IP address
from the pull-down menu.
4.9.6 Configuring Adaptive AP Firmware
Refer to the AP Firmware tab to view the Access Port and Adaptive AP firmware image associated with
each adopted Access Port or Adaptive AP. The screen allows you to update the firmware image for Adaptive
APs that associate with the switch.
To view AP firmware information:
1. Select Network > Access Port from the main menu tree.
2. Click the AP Firmware tab.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English