Motorola RFS Series System Reference Guide

6-124 Motorola RF Switch System Reference Guide
4. Select the Clear Report button to clear the statistic counters and begin a new data calculation.
6.10.4 Reviewing Found Probes
Refer to the Probes Found tab to view the enhanced Probe report created by the switch. The table displays
probe information collected during the AP’s channel scan. The information displayed within the Probes Found
tab is read-only with no user configurable parameters.
To view the enhanced beacons table report:
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
2. Select the Probes Found tab.
3. Refer to the following information as displayed within the Probes Found tab.
4. Select the Clear Report button to clear the statistic counters and begin a new data calculation.
Signal Strength
(dBm)
Displays the signal strength when the unadopted AP was detected.
Heard Channel Displays the channel frequency when the unadopted AP was detected.
Heard Time Displays the time when the unadopted AP was detected.
Portal MAC Displays the MAC address of the unadopted MU picked detected by the Enhanced
Probes enabled AP.
MU MAC Displays the MAC address of the Enhanced Probe detected MU.
Signal Strength
(dBm)
Displays the signal strength when the unadopted MU was detected.
Heard Channel Displays the channel frequency used when the unadopted MU was detected.
Heard Time Displays the time the unadopted MU was detected.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English