Motorola RFS Series System Reference Guide

7-10 Motorola RF Switch System Reference Guide
7.3.4 Message Parameters
To view Message Parameters:
1. Select Management Access > SNMP Access from the main menu tree.
2. Select the Message Parameters tab from within the SNMP Access screen.
3. Refer to the following parameters displayed with in Message Parameters screen.
4. The Apply and Revert buttons are greyed out within this screen, as there is no data to be configured or
saved.
5. Highlight an existing message parameter and edit the value. Click the Apply button to save the changes
made.
6. Highlight an existing message parameter and click the Revert button to remove the changes made.
7.4 Configuring SNMP Traps
Use the SNMP Trap Configuration screen to enable or disable individual traps or by functional trap groups.
It is also used for modifying the existing threshold conditions values for individual trap descriptions. Refer to
the tabs within the SNMP Trap Configuration screen to conduct the following configuration activities:
• Enabling Trap Configuration
• Configuring Trap Thresholds
Retries Displays the number of retries permitted
Timeout Displays the timeout in seconds
Rows per Request Displays the number of rows per request

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English