Switch Information 3-17
2. Select the Runtime tab to display the following read-only information:
3.2.3 Reviewing Port Statistics
The Statistics tab displays read-only statistics for ethernet ports. Use this information to assess if
configuration changes are required to improve network performance.
To view the runtime configuration details of the switch ports:
1. Select Switch > Ports from the main menu tree.
Name Displays the port’s current name.
MAC Address Displays the port’s MAC Address. This value is read-only, set at the factory and
cannot be modified.
Oper Status Displays the link status of the port. The port status can be either Up or Down.
Speed Displays the current speed of the data transmitted and received over the port.
Duplex Displays the port as either half duplex, full duplex, or Unknown.
MTU Displays the maximum transmission unit (MTU) setting configured on the port. The
MTU value represents the largest packet size that can be sent over a link. 10/100
Ethernet ports have a maximum MTU setting of 1500.
To Next Page
Loading...
