Network Setup 4-79
RF Switch (config-wireless) #wlan 1 radius-server secondary radius-key my-rad-secret-2
RF Switch (config-wireless) #
4. Configure the NAC server’s timeout and re-transmit settings. The timeout parameter configures the
duration for which the switch waits for a response from the Radius server before attempting a retry. This
is a global setting for both the primary and secondary server.
The re-transmit parameter defines the number of retries a switch attempts before dis-associating
the MU.
RF Switch(config-wireless) #wlan 1 nac-server timeout 30 retransmit 10
RF Switch(config-wireless) #
5. Configure WLAN for EAP authentication and define the encryption type.
RF Switch(config-wireless) #wlan 1 authentication-type eap
RF Switch(config-wireless) #wlan 1 encryption-type wep128
RF Switch(config-wireless) #wlan 1 ssid wlan-1
To Next Page
Loading...
