Network Setup 4-123
3. Select a radio from the table and click the Edit button.
The radio settings are divided into the following three sections:
• Properties
• Radio Rescuer Settings
• Advanced Properties
4. The Properties section displays the following information:
Description Displays a description of the Radio. Modify the description as required to name
the radio by its intended coverage area or function.
MAC Address Displays the Media Access Control (MAC) Address of the selected AP.
AP Name Displays the name assigned to the AP. The AP name can be configured on the
Access Port Radios Configuration page.
AP Type Displays the type of Access Port detected. The switches support Motorola AP 100,
AP300 and AP650 model Access Ports and AP-4131, AP-5131 and AP-7131 model
Access Points.
To Next Page
Loading...
