Network Setup 4-137
Supported Rates allow an 802.11 network to specify the data rate it supports. When a station attempts
to join the network, it checks the data rate used on the network. If a rate is selected as a basic rate, it is
automatically selected as a supported rate.
4. Click the Clear all rates button to uncheck all of the Basic and Supported rates.
5. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel to close the dialog without committing updates to the running configuration.
To Next Page
Loading...
Need help?
General
