Motorola RFS Series System Reference Guide

4-150 Motorola RF Switch System Reference Guide
2. Click the Sensor tab.
3. Specify the global default VLAN ID and the Ping Interval for all sensors and click the Apply button.
4. In the Default Configuration section, give the default configuration values of the WIPS server. Unselect
the Use DHCP to obtain IP Address automatically option to assign IP address of the VLAN manually
and do not want DHCP to provide them. Selecting this disables the IP address field and the Subnet Mask
field. Enter the IP Address and the Subnet Mask of the default VLAN in the respective fields. Also
enter the Gateway IP Address, Primary WIPS Server Address, and the Secondary WIPS Server
Address. The Sensor Display Table displays the following information:
Index Displays the numerical value assigned to each sensor AP.
MAC Address Displays the Media Access Control (MAC) address for each sensor AP.
VLAN Displays the VLAN that each sensor AP is associated with.
Last Heard (sec) Displays the number of seconds since the switch last received packets from each
sensor AP.
IP Address Displays the current IP address for each sensor AP.
Revert to AP Select a sensor AP from the table and click the Revert to AP button to return to
convert the AP back to a standard Access Port.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English