Overview 1-31
IEEE 802.1x Yes Full support IEEE 802.1x
authentication ether with a fully
functional integrated RADIUS
server built into our RF Switches
and Access Points or an external
RADIUS server such as
Microsoft IAS, Microsoft NPS,
Cisco Secure ACS, Free RADIUS
and Juniper Steel Belted
RADIUS (to name a few).
When using the integrated
RADIUS server we support the
following EAP methods:
•EAP-TLS
• EAP-GTC (PEAPv1)
• EAP-MSCHAPv2 (PEAPv0)
• EAP-TTLS (MD5, PAP,
MSCHAPv2)
When using an external RADIUS
server the EAP type is
transparent to the WLAN
infrastructure allowing any
standard EAP method to be
supported.
The IEEE 802.1x standard is fully
supported on the following
Switch Platforms:
•WS2000
•WS5100
• RFS6000
• RFS7000
The IEEE 802.1x standard is fully
supported on the following AP
Platforms:
• AP100 Access Port
• AP4131 Access Port
• AP300 Access Port
• AP5131 Access Point
• AP5181 Access Point
• AP7131 Access Point
IEEE Standard Supported Notes
To Next Page
Loading...
