Motorola RFS Series System Reference Guide

Switch Management 7-13
7.4.1.1 Configuring E-mail Notifications
To enable e-mail notification:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
2. Click the Email Configuration button to launch a dialogue where you can configure outgoing E-mail
servers and addresses for alerts.
3. Check the Enable SMTP box to enable the outgoing mail server on the switch. In order to use E-mail
notification on the switch, this box must be checked.
Configure the SMTP mail server properties as follows:
Name Enter the hostname of your outgoing SMTP mail server. This is the server that is
used to deliver outgoing mail.
Port Specify the port number used by your outgoing SMTP server. In many cases this is
port 25.
User Name Enter the username for the user which will be sending outgoing mail through the
SMTP server.
Password Enter the password associated with the above username.
Enable Authentication Check the Enable Authentication box to enable support for SMTP Authentication
which is required for certain outgoing SMTP servers.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English