Diagnostics 8-17
2. Select a record from those available and click the Transfer button.
3. Use the From drop-down menu to specify the location from which the file is sent. If only the applet is
available as a transfer location, use the default switch option.
4. Select a file for the file transfer from the File drop-down menu. The drop-down menu contains the panic
files listed within the File-Mgmt screen.
5. Use the To drop-down menu (within the Target field) to define whether the target panic file is to be sent
to the system's local disk (Local Disk) or to an external server (Server).
6. Provide the name of the file to be transferred to the location specified within the File field.
7. If Server has been selected as the source, use the Using drop down-menu to configure whether the panic
file transfer will be sent using FTP or TFTP.
8. If Server has been selected as the source, enter the IP Address of the destination server or system
receiving the target panic file.
9. If Server has been selected as the source, enter the User ID credentials required to send the file to the
target location. The User ID is required for FTP transfers only.
10.If Server has been selected as the source, enter the Password required (for FTP transfers) to send the
file to the target location.
11.Specify the appropriate path name to the target directory on the local system disk or server as configured
using the "To" parameter. If local server is selected, use the Browse button to specify a location on your
local machine.
12. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
13.Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the Abort button to terminate the
transfer.
15. Click the Close button to exit the dialogue and abandon the transfer.
To Next Page
Loading...
Need help?
General
