► To change the position of a selected step in Step mode, hold its pad and turn the 4-D en-
coder.
→ The adjusted value is temporarily shown on the left display.
To adjust the value in finer increments, press and turn the 4-D encoder (or hold SHIFT
while you turn it).
These shortcuts control the AMOUNT parameter in the SWING page of the Master’s,
Group’s, and Sound’s Groove properties, respectively. See section ↑5.4.3, Groove for a
detailed description of these properties.
In the software you can also adjust the Swing amount of your Project via the SWING control in
the Header:
The SWING control in the software’s Header.
Tempo and Tune Shortcuts
The TEMPO button.
In Pad Mode, Keyboard mode or Chords mode:
1. Press TEMPO [Tune] button.
Playing on the Controller
Playing Tools
MASCHINE - Manual - 251
To Next Page
Loading...
