Instead of using the Plug-in menu to load a Plug-in with its default settings, you can
also use the Browser to load a particular preset for a Plug-in. In particular, this can
come in handy to insert a new Plug-in between two existing Plug-ins of the Plug-in List.
Please refer to chapter ↑3.2, Searching and Loading Files from the Library for more in-
formation.
Removing and Replacing a Plug-in
Once you have loaded a Plug-in into a Plug-in slot, the slot shows the name of the loaded
Plug-in, preceded by an icon describing the type of Plug-in (Instrument or Effect), and fol-
lowed by a down-pointing arrow:
A few Plug-ins loaded.
This down-pointing arrow lets you open the Plug-in menu for slots already hosting a Plug-in.
► In the Plug-in List, click the down-pointing arrow at the right of a Plug-in name to open
the Plug-in menu for that slot. You can also right-click ([Ctrl]-click on macOS) the Plug-in
name in the slot.
This will notably allow you to remove the loaded Plug-in from the slot:
Working with Plug-ins
Plug-in Overview
MASCHINE - Manual - 284
To Next Page
Loading...
