4. Press SELECT + the unlit pad of the empty Sound you want to use (or simply hit its unlit
pad if pads are in Group mode).
Since we have selected an empty Sound, you see (NONE) under Button 7/8 and these
buttons are inactive (i.e. there are no Plug-ins to navigate yet).
5. Press SHIFT + BROWSE to open the Plug-in Browser and browse the available Instrument
and Effect Plug-ins.
6. On the left display, turn Knob 1 to select the TYPE to Effect.
▪ The right display shows the list of available instruments or effect Plug-ins.
7. If you have selected the first Plug-in slot of a Sound, turn Knob 2 to select the VENDOR
from INTERNAL, or the name of a vendor, e.g. Native Instruments.
▪ The right display shows only Effect Plug-ins of the type you have selected.
8. Turn the 4-D encoder or Knob 8 to browse the effects Plug-ins corresponding to your se-
lection.
Using Effects
Creating a Send Effect
MASCHINE - Manual - 651
To Next Page
Loading...
