Native Instruments MASCHINE MK3 User Manual

Classic Mode – Parameter Description
Input Controls the input gain of the effect. Increasing Input will also
increase the amount of compression performed on the audio
signal.
Contour Determines how closely the Saturator responds to the input
volume. Higher values create a more distorted sound.
Drive Adjusts the amount of distortion introduced by the Saturator.
The Saturator in Classic mode on the controller.
Tape Mode
The Tape mode emulates the soft compression and pleasant saturation induced by recording to
analogue magnetic tapes. It can be used lightly to add warmth and coloring to the sound, or
heavily to add aggressive distortion.
The Saturator in Tape mode in the Control area.
Effect Reference
Distortion Effects
MASCHINE - Manual - 723

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs