Native Instruments MASCHINE MK3 User Manual

3. In the Browser, select the Sample you want to add to the map of the current Sound (see
↑3.2, Searching and Loading Files from the Library for more information on using the
Browser on your controller).
4. Press Button 8 (LOAD) to load the Sample.
→ A new Zone is created that contains the added Sample. Your controller automatically
switches back to Sampling mode and the new Zone is selected and appears on the right
display, ready to be tweaked.
While in the Browser you can press Button 6 (CANCEL) to return to Sampling mode
without loading any new Sample.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE - Manual - 883

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs