Monitoring System Access and Performance
463
ProSecure Unified Threat Management (UTM) Appliance
Figure 273.
The following table explains the fields of the Wireless Statistics screen.
To change the poll interval period, enter a new value in the Poll Interval field, and then
click Set interval. To stop polling, click Stop.
Table 120. Wireless Statistics screen fields
Item Description
Radio Statistics Details
Packets The number of received (Rx) and transmitted (Tx) packets on the radio in bytes.
Bytes The number of received (Rx) and transmitted (Tx) bytes on the radio.
Errors The number of received (Rx) and transmitted (Tx) errors on the radio.
Dropped The number of received (Rx) and transmitted (Tx) dropped packets on the radio.
Multicast The number of received (Rx) and transmitted (Tx) multicast packets on the radio.
Collisions The number of signal collisions that have occurred on the radio. A collision occurs when
the radio attempts to send data at the same time as a wireless station that is connected to
the radio.
AP Statistics
AP Name The name for the virtual access point (VAP) is ap1.
Packets The number of received (Rx) and transmitted (Tx) packets on the access point in bytes.
Bytes The number of received (Rx) and transmitted (Tx) bytes on the access point.
Errors The number of received (Rx) and transmitted (Tx) errors on the access point.
Dropped The number of received (Rx) and transmitted (Tx) dropped packets on the access point.
To Next Page
Loading...
Need help?
General