M10 AT Commands Set
M10_ATC_V1.01 - 137 -
mode
9 Mobile Originated call no answer
10 Mobile Originated call remote number busy
“BC” Battery Charge
Displays battery connection status and battery charge level(similar
To AT+CBC) in form +CBCN:<bcs>,<bcl> when values change.
“BM” Band mode
Displays band mode (similar to AT+QBAND)in form +QBAND:
<band>when value changes.
“SM” Additional SMS Information
Displays additional information about SMS events in the form of
Unsolicited messages of the following format
+TSMSINFO: <CMS error info>
where <CMS error info> is a standard CMS error in the format
defined by the AT+CMEE command i.e. either a number or a
string.
“CC” Call information
Displays the disconnected call ID and the remain call numbers after
one of the call disconnected.
+CCINFO : <Call id Disconnected>,<Remain calls>
<mode>
0 disable
1 enable
2 query
Reference
Note
To Next Page
Loading...
