Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 163 -
the TE with unsolicited result
code instead of the normal
RING
43 +CREG:<stat> Indicate registration status of the
ME
AT+CREG=1
44 +CREG:<stat>[,<lac>] After cell neighborhood
changing shows whether the
network has currently indicated
the registration of the ME, with
location area code
AT+CREG=2
45 CCWV Call meter warning,5 seconds
left before ACM
AT+CCWV=1
46 +CCWA:<number>,<type>,<cla
ss>[,<alpha>]
Caall waiting indication AT+CCWA=1,1
47 RDY ME initialization successful n/a
48 +CFUN:1 All function of the ME is
acailable
n/a
49 +CPIN:<state> SIM card pin state n/a
50 MO RING MO call ringing AT+QMOSTAT=
1
51 MO CONNECTED MO call connexted AT+QMOSTAT=
1
52 ALARM RING Alarm event triggered AT+QALARM=1
,<time>,<repeat>,
0/1
53 ALARM MODE ME switched on by alarm AT+QALARM=1
,<time>,<repeat>,
2
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English