Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 6 -
6.2.10 AT+QLOCTS Get Local Timestamp.................................................................................120
6.2.11 AT+QEXTHS External Headset Jack Control...................................................................121
6.2.12 AT+QHSBTN Headset Button Status Reporting...............................................................122
6.2.13 AT+QSIMSTAT SIM Inserted Status Reporting .............................................................122
6.2.14 AT+QLDTMF Generate Local DTMF Tone...................................................................123
6.2.15 AT+QCGTIND CS Voice/Data/Fax Call Or GPRS PDP Context Termination Indication124
6.2.16 AT+QSPN Get Service Provider Name From SIM...........................................................124
6.2.17 AT+QBAND Get And Set Mobile Operation Band...........................................................125
6.2.18 AT+QAUDCH Swap The Audio Channels .......................................................................125
6.2.19 AT+QSCLK Configure Slow Clock..................................................................................126
6.2.20 AT+QENG Switch On Or Off Engineering Mode.............................................................126
6.2.21 AT+QSCLASS0 Store Class 0 SMS To SIM When Received Class 0 SMS.....................128
6.2.22 AT+QCCID Show ICCID..................................................................................................128
6.2.23 AT+QTEMP Set Critical Temperature Operating Mode Or Query Temperature.............129
6.2.24 AT+QSIMDET Switch On Or Off Detecting SIM Card...................................................129
6.2.25 AT+QMGDA Delete All SMS..........................................................................................130
6.2.26 AT+QLTONE Generate Local Specifical Tone................................................................131
6.2.27 AT+QCLIP Connected Line Identification Presentation Without Alpha String...............131
6.2.28 AT+QGID Get SIM Card Group Identifier.......................................................................131
6.2.29 AT+QMOSTAT Show State of Mobile Originated Call...................................................132
6.2.30 AT+QGPCLASS Change GPRS Multi Slot Class............................................................132
6.2.31 AT+QMGHEX Enable To Send Non-ASCII Character SMS...........................................133
6.2.32 AT+QAUDLOOP Audio Channel Loopback Test ...........................................................134
6.2.33 AT+QSMSCODE Configure SMS Code Mode................................................................134
6.2.34 AT+QIURC Enable Or Disable Initial URC Presentation ................................................135
6.2.35 AT+QCSPWD Change PS Super Password......................................................................135
6.2.36 AT+QEXTUNSOL Enable /Disable Proprietary Unsolicited Indications.........................135
7 AT Commands for TCPIP Application Toolkit..............................................................................138
7.1 Overview....................................................................................................................................138
7.2 Detailed Descriptions of Commands..........................................................................................138
7.2.1 AT+QIOPEN Start Up TCP Or UDP Connection................................................................138
7.2.2 AT+QISEND Send Data Through TCP Or UDP Connection..............................................139
7.2.3 AT+QICLOSE Close TCP Or UDP Connection..................................................................140
7.2.4 AT+QIDEACT Deactivate GPRS/CSD PDP Context.........................................................141
7.2.5 AT+QILPORT Set Local Port..............................................................................................142
7.2.6 AT+QIREGAPP START TCPIP Task And Set APN、USER NAME、PASSWORD .......142
7.2.7 AT+QIACT Bring Up Wireless Connection With GPRS Or CSD ......................................143
7.2.8 AT+QILOCIP Get Local IP Address ...................................................................................143
7.2.9 AT+QISTAT Query Current Connection Status...................................................................144
7.2.10 AT+QIDNSCFG Configure Domain Name Server...........................................................144
7.2.11 AT+QIDNSGIP Query The IP Address Of Given Domain Name .....................................145
7.2.12 AT+QIDNSIP Connect With IP Address Or Domain Name Server ..................................146
7.2.13 AT+QIHEAD Add An IP Head When Receiving Data......................................................146
7.2.14 AT+QIAUTOS Set Auto Sending Timer...........................................................................147
7.2.15 AT+QIPROMPT Set Prompt Of ‘>’ When Sending Data .................................................147
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English